Multi F
ormat L
CD M
onitor
10
Multi F
ormat L
CD M
onitor
10
FRONT
Controls, Indicators and Connections
̾
[ANALOG] Button/Lamp
- Used to select the desired Analog input. Press the button to activate the analog input menu-
selection, then use UP and DOWN button to select desired input.
* See section “Other Functions [1]ANALOG Button” for more information.
̾
[PBP] Button/Lamp
- Used to select the PBP (Picture-by-Picture) function.
- Selects order of operation: mode 1 -> mode 2 -> mode 3 in sequence.
- Use [CHROMA/PHASE/SCREEN SEL] button to select a screen and use SOURCE key (Analog, SDI-A
or SDI-B) to switch the screen to desired input signal.
- LVM-173W-3G model, the input signal lamp for each of the PBP screens turns on.
̾
[SDI-A] Button/Lamp
- Used to select SDI-A/B input.
- Used to select SDI-A input (LVM-173W-3G).
̾
[SDI-B] Button/Lamp (LVM-173W-3G)
- Used to selects SDI-B input.
̾
[SCAN] Button/Lamp
- Used to change the scan mode. Press the button to activate through the scan modes: OVER SCAN
-> ZERO SCAN -> UNDER SCAN -> 2:1 SCAN -> 1:1 SCAN -> FIT WIDTH -> ZOOM (PBP 16:9 mode).
* See section “Other Functions [2]SCAN Button” for more information.
̾
[ASPECT] Button/Lamp
- Used to change the display ratio between 4:3 and 16:9.
- Display ratio locks to 16:9 if the display ratio of input signal is 16:9.
- See section “Other Functions [3] ASPECT Button” for more information.
̾
[MARKER] Button/Lamp
- Used to activate/deactivate the marker.
- The desired aspect ratio can be displayed on the screen properly when the type of marker selected
from the main menu.
- If AFD is selected on the main menu, marker automatically activates when input signal contains
the embedded AFD data.
MODE1
MODE2
MODE 3