![TVLogic LVM-172W Скачать руководство пользователя страница 8](http://html.mh-extra.com/html/tvlogic/lvm-172w/lvm-172w_operation-manual_1183376008.webp)
[MARKER] Button/Lamp
- Used to activate/deactivate the Marker. The type of marker at work may be selected on the main menu.
[H/V DELAY] button/lamp
- Used to check horizontal sync and vertical sync simultaneously.
[BLUE ONLY]/[MONO] Button/Lamp
- Activates in the order of [Off ]-[Blue Only]-[Mono]-[Focus Assist]-[Off ]
- Press the button to remove red and green from the input signal and display the screen only under a blue
signal.
Press the button again to activate mono mode. They are not available in RGB, DVI ANALOG, DVI DIGITAL
and HDMI modes.
# [Focus Assist] : Focus assist support feature.
Use [Chroma] knob to control the sensitivity level(0~80) of Focus Assist. Maximum value is 80.
[PHASE] Button
- Used to activate PHASE and Closed Caption feature and use UP/DOWN buttons to toggle through the values.
- Feature activates differently in different input mode:
- SDI-A/B input : Closed Caption.
- Composite/S-Video input : PHASE
[T.C] Button/Lamp
- Used to activate Timecode (VITC,LTC) display feature.
- Press the button once to activates VITC and press again to activate LTC.
[MENU] Button
- Used to activate the main OSD Menu.
[UP] Button
- Used to move within the menus during OSD menu activation and is also used to increase the value of
selected feature.
- In Pixel to Pixel mode, press the button to rotate the display clockwise. (LVM-172W)
[DOWN] Button
- Used to move within the menus during OSD menu activation and is also used to decrease the value of the
selected feature.
- in Pixel to Pixel mode, press the button to rotate the displays counterclockwise. (LVM-172W)
[ENTER] Button
- Used to confirm a chosen value.
[POWER] Button
- Power On/Off button. LED lights in Red when the power is Off and lights in Green if the signal is normal. If
the signal is unsupported or disconnected, LED flashes in yellow.
[TALLY]
- Tally lamp that can be toggled in green or red using the REMOTE(RJ-45) port or RS-422 serial communication.
[APERTURE] Knob
- Used to adjust the picture sharpness. The value is selectable between -12 ~ 12.
#Aperture is not available in DVI Analog or Graphic mode.
Name & Function of Each Part
M
ul
ti F
orm
at
L
CD M
oni
to
r
08
Содержание LVM-172W
Страница 1: ...Multi Format LCD MONITOR Operation Manual MULTI LVM 172W LVM 242W ...
Страница 2: ......