manualshive.com logo in svg

TVLogic LVM-091W, Руководство пользователя

Поделиться
Скачать
TVLogic LVM-091W Скачать руководство пользователя страница 5

4

· 

The vents and other openings in the cabinet are designed for ventilation. Do not 

cover or block these vents and openings since insufficient ventilation can cause 

overheating and/or shorten the life of the product. Do not place the product on a bed, 

sofa, rug or other similar surface, since they can block ventilation openings. This 

product is not designed for built-in installation; do not place the product in an 

enclosed place such as a bookcase or rack, unless proper ventilation is provided or 

the manufacturer's instructions are followed.

· 

The LCD panel used in this product is made of glass. Therefore, it can break when 

the product is dropped or applied with impact. Be careful not to be injured by broken 

glass pieces in case the LCD panel breaks.

· 

Keep the product away from heat sources such as radiators, heaters, stoves and 

other heat-generating products (including amplifiers).

FCC (Federal Communications Commission)

This equipment has been tested and found to comply with the limits for class A digital device, 

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable 

protection against harmful interface when the equipment is operated in a commercial 

environment.

This equipment generates, uses, and can radiate radio frequency energy, and if not installed 

and used in accordance with the instruction manual, may cause harmful interference to radio 

communications. Operation of this equipment in a residential to correct the interference at 

his own expense

   Warning!!

 : Change or modifications not expressly approved by the manufacturer 

responsible for compliance void the user’s authority to operate the equipment.

Disposal of Old Electrical & Electronic Equipment 

(Applicable in the European Union and other European 

countries with separate collection systems)

This symbol on the product or on its packing indicates that this product shall not be treated 

as household waste. Instead it shall be handed over to the applicable collection point for 

the recycling of electrical and electronic equipment. By ensuring this product is disposed 

of correctly, you will help prevent potential negative consequence for the environment and 

human health, which could otherwise be caused by inappropriate waste handling of this 

product. The recycling of materials will help to conserve natural resources. 

!

LVM-091W

Содержание LVM-091W





























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды