TVLogic LVM-074W, Руководство по эксплуатации

Страница: 9 / 36

Multi Format LCD Monitor 9
3. Controls & Functions
FRONT REAR
t
[OPERATE] Lamp
- Indicates condition and power status of unit.
- Light turns off when the power is disconnected.
- Standby mode is indicated by a red LED light.
- Normal (active) mode is indicated by a Green
LED light.
- Restores to previous state when monitor
power turns off and comes back on.
t [POWER] Button
- Used to turn power on and off.
t
AUDIO OUT (Phone Jack)
- Used for Stereo Audio Output through Phone
Jack. (video signals with embedded audio only)
t
PGM (Mini USB)
- This terminal is used to upgrade the firmware
or color calibration made by TVLogic.
t [TALLY] Lamp
- Tally lamp that can be toggled in green or red
using the REMOTE(RJ-45) port.
t
[BRIGHT] Knob
- Used to adjust the degree of brightness.
- The value is selectable between -100 ~ 100.
t
[CONTRAST] Knob
- Used to adjust the contrast.
- The value is selectable between -100 ~ 100.
t
[VOLUME/F5] Knob
- Used to adjust the volume for internal speaker
and external output.
- The value is selectable between 0 ~ 30.
- [F5] : Press F5 Knob for 2 second to set the
function. Available functions are [VOLUME]-
[CHROMA]-[APERTURE]-[PHASE]-[FOCUS
LEVEL].
t
[UP/DOWN/ENTER] Knob
- Used to move within the menu when OSD
menu is activated, and is also used to
decrease or increase the value of the selected
feature.
- Press the knob to select the main menu and
sub menus.
t
EXT.TALLY IN
- This terminal uesd to External tally input.
t [TALLY] Lamp
- Tally lamp that can be toggled in green or red
using the REMOTE(RJ-45) port.
t
[SDI-IN A] (BNC)
- HD/SD SDI signal input terminal for SDI A.
t [SDI-OUT A] (BNC)
- HD/SD-SDI signal output terminal for SDI A
signal.
t
[SDI-IN B] (BNC)
- HD/SD SDI signal input terminal for SDI B.
t [CVSBS1/Pr/R/S-C] (BNC)
- Signal input terminal used to feed themonitor
COMPOSITE 3, S-VIDEO C, COMPONENT Pr
and RGB R signals.
t
[CVBS2/Y/G/S-Y] (BNC)
- Signal input terminal used to feed the monitor
COMPOSITE 1, S-VIDEO Y, COMPONENT Y and
RGB G signals.
t
[CVSBS3/Pb/B] (BNC)
- Signal input terminal used to feed the monitor
COMPOSITE 2, RGB B and COMPONENT Pb
signals.
t AUDIO IN (phone jack)
- Internal speakers stereo audio input terminal.
t
[HDMI] IN
- Signal input terminal for HDMI signal.
t
[HDMI] OUT
- Signal output terminal for HDMI signal.
t
LAN
- Used for easy firmware updates.
t [RS422 IN/OUT] (RJ-45)
- Used to control the monitor with protocol
provided by TVLogic or to support TSL
protocol.