background image

FCM/LHM S

eries Monit

or  5

Caution

t

When mounting the product on a wall or ceiling,

   be sure to install the product according to the 
   method recommended by the manufacturer.

t

Unplug the power cord from the DC outlet    

  before cleaning the product. Use a damp cloth  
  to clean the product. Do not use liquid cleaners 
  or aerosol cleaners.

t

Unplug the power cord from the AC outlet if 

  you do not use the product for considerably 
   long time.

t

Do not use the product near water, such as

  bathtub, washbasin, kitchen sink and laundry 
  tub, swimming pool and in a wet basement.

t

Keep the product away from direct rays of the

   Sun-light.

t

Do not place the product on an unstable cart,

   stand, tripod or table. Placing the product on an 
   unstable base can cause the product to fall, 
   resulting in serious personal injuries as well as 
   damage to the product. Use only a cart, stand,
   tripod, bracket or table recommended by the
   manufacturer or sold with the product. When
   mounting the product on a wall, be sure to
   follow the manufacturer’s instruction. Use only
   the mounting hardware recommended by the
   manufacturer.

t

When relocating the product placed on a cart, it

   must be moved with the utmost care. 

t

Sudden stops, excessive force and uneven

   floor surface can cause the product to fall from 
  the cart. 

t

The vents and other openings in the 

  cabinet are designed for ventilation. Do not 
  cover or block these vents and openings since  
  insufficient ventilation can cause overheating 
   and/or shorten the life of the product. Do not 
   place the product on a bed, sofa, rug or other 
   similar surface, since they can block ventilation 
   openings. This product is not designed for 
   built-in installation; do not place the product 
   in an enclosed place such as a bookcase or rack,
  unless proper ventilation is provided or the   
  manufacturer’s instructions are followed.

t

In case of installation the product on the rack,  

  the inside of the product would be overheated  
  due to heat from other devices near by and the  
  decrease of air circulation, which could damage 
  to the monitor. To prevent the damage, please 
  have enough space for the monitors and use 
  fan to avoid heat and maintain the operating 
  temperature. (Refer to the specication of the 
 product).

t

The LCD panel used in this product is made of  

  glass. Therefore, it can break when the product  
  is dropped or applied with impact. Be careful  
  not to be injured by broken glass pieces in case  
  the LCD panel breaks. 

t

Keep the product away from heat sources    

  such as radiators, heaters, stoves and other heat 
  generating products (including amplifiers).

Содержание FCM-461W

































Отзывы: