[NTSC]: for NTSC system TV.
[PAL]: for PAL system TV
Channel Search
To access the Menu, Press MENU then select [Search Channel]
using the RIGHT/LEFT key. The Menu provides options to
adjust the Search Channel settings. Press UP/DOWN to select
an option and press RIGHT/LEFT to adjust the setting. Press
EXIT to exit the Menu.
(a) Auto Search
This option will automatically search for channels and save
them once the scanning is complete. All previously saved
channels and settings will be deleted.
1. Select (Auto Search) and press OK or RIGHT to star
channel search.
2.
To cancel channel search, press EXIT .
Any channels that
have been found will be saved.
(b) Manual Search
This option allows you to scan for new channels without deleting
previously saved channel and settings.
Select (Manual Search) then press OK or RIGHT. The channel
search screen will appear.
Press the RIGHT/LEFT key to select the channel frequency
Press OK to start searching channels.
If a channel is found, it is saved and added to the channels list.If
channels can not be found during searching ,the unit will exit
automatically.
(c) Country
Select your country of residence.
(d) Antenna Power
Enable Antenna Power if an external active antenna is connected.
Time Setting
To access the Menu, Press MENU then select [Time] using the RIGHT/LEFT key .The Menu
provides options to adjust the time settings.Press UP/DOWN to select an option and press
RIGHT/LEFT to adjust the setting. Press EXIT to exit the Menu.
(a) Time offset
Select auto or manual for GMToffset adjustments.
(b) Country Region
Select the Country Region when [Time Offset] is set to Auto.
(c) Time Zone