3.Installation the Batteries
Remove the battery cover from the rear of the Remote Control and place 2xAAA size batteries
inside the compartment.
Please make sure the battery polarities match the polarity markings inside the compartment.
1 .Open the cover
2.Install batteries
3.Close the cover
Using the Remote Control
To use the Remote Control, point it towards the front of the Digital Set Top Box.
The Remote Control has a range of up to 7 metres from the Set Top Box at an angle of
up to 60 degrees. The Remote Control will not operate if its IR sensor is blocked.
Sunlight or very bright light decrease the sensivity of the Remote Control
Connecting to a Television
For a basic connection from your Set Top Box to the television, use SCART connection
For the highest quality connection use a direct HDMI connection, see below.
.