[By ONID]
Sort the channels accroding to ONID
(d) LCN (Logical channel number)
Set LCN on or OFF if you want to sort the channels manually.
Picture Setting
To access the Menu,Press MENU then select [Picture] using the
RIGHT/LEFT key .The Menu provides options to adjust the
video settings.Press UP/DOWN to select an option and press
RIGHT/LEFT to adjust that setting.Press EXIT to exit the
menu.
(a) Resolution
You can change this setting if the picture resoltion dose not apper to be correct.This setting is
to match the most common setting for HDMI.
[480P]
for NTSC TV system
[576P]
for PAL TV system
[720P]
for NTSC or PAL TV system
[1080P]
for NTSC or PAL TV system
(b) TV Format
If the picture dose not appear to be cerrect you can change this setting.This should match the
most common setting for TVs in your country.
[NTSC]: for NTSC system TV.
[PAL]: for PAL system TV
Channel Search
To access the Menu,Press MENU then select [Search Channel]
using the RIGHT/LEFT key. The Menu provides options to
adjust the Search Channel settings.Press UP/DOWN to select an
option and press RIGHT/LEFT to adjust the setting. Press EXIT
to exit the Menu.
(a) Auto Search
This option will automatically search for channels and save
them once the scanning is complete. All previously saved
channels and settings will be deleted.
1. Select (Auto Search) and press OK or RIGHT to star
channel search.
2.
To cancel channel search,press EXIT .
Any channels that
have been found will be saved.
(b)Manual Search
This option allows you to scan for new channels without deleting
previously saved channel and settings.
Select (Manual Search) then press OK or RIGHT. The channel
search screen will appear.
Press the RIGHT/LEFT key to select the channel frequency
Press OK to start searching channels.
