TV One MX-3141PCA, Инструкция по эксплуатации

Страница: 7 / 10

5
The user should connect the inputs using high quality cables, connect the RS-232 cable
if used and finally connect the video and appropriate audio outputs to a monitor,
projector or other destination device. After connecting the signal cables, the AC power
adapter should be connected, first to the MX3141PCA and then to the AC power
source.
5.0 OPERATING THE MX-3141PCA
Once the signal cables and AC power adapter have been connected, the switcher can
be turned on using the front panel power switch.
If the appropriate signals have been applied to the inputs, a high quality signal should
appear on the monitor or projector as each input in turn is selected. As previously
mentioned, the user can freely intermix PC video and YPbPr Component video as
inputs to the MX-3141PCA. It is important however to realize that the monitor or other
device connected to the switcher’s output must be capable of displaying both PC video
and YPbPr video else there will be faulty displays or no display present. Finally, gain is
unity so the output should mirror the inputs in all cases.
Note: Audio I/O is line level. It
is not possible to directly feed speakers or receive audio from a source speaker output.
Damage may result if attempted.
5.1 Operating the MX-3141PCA Using the Included IR Remote
Operation of the switcher via the included Infrared Remote Control is a matter of simply
pointing the remote at the MX-3141PCA and selecting the appropriate input on the
remote control. In order for the remote to function properly, the small square window on
the front of the MX-3141PCA must be unobstructed and not in sunlight or extremely
bright artificial light. The distance from the IR remote and the switcher should not be
more than found in a standard residential room.
6.0 TROUBLESHOOTING
Most problems encountered with the MX-3141 series of products relate to faulty cables
or incorrect signal levels from the sources.
If some inputs function correctly and others do not, interchange cables between sources
and see if the problem moves with the cables. If it moves, a bad cable or cable
connector is the probable reason for the trouble. If the problem remains with one
particular input, connect that source to a different input using the same cable and see if
the problem moves. If it does, the problem is with the source.
After trying the above suggestions should the problem still persist, contact your dealer
for additional suggestions before contacting TV One. Should the dealer’s technical
personnel be unable to assist you, contact TV One via our support website:
http://tvone.crmdesk.com. Create a technical support request on the site and our
support team will respond within a short period of time.