TV One LM-404HDA, Инструкция по эксплуатации

Страница: 9 / 11

9
Display Mode 4:3 and 16:9 video mode for user selection
Brightness Adjust the brightness of screen. (Adjustment range 0~15)
Contrast Adjust the contrast of screen. (Adjustment range 0~127.)
Color Mode Adjust independent R.G.B. Color level
Saturation Adjust the Saturation of screen. (Adjustment range 0~255)
Blue Only Select only Blue channel for display of image
H/V delay Used for displaying Sync and Blanking timing
Marker Select 4:3/16:9 Safe Area Marker (SDI Only)
VU Meter Select OSD VU Meter Display
Audio Out Turns Headphone Jack On/Off
Audio Out Ch1 – 4 Selects SDI Embedded Stereo Audio channels for Monitoring
Audio Out AES Selects AES Audio Channel for Monitoring
Audio Out L/R Selects Analog Stereo Audio Channels for Monitoring
Reset Resets the settings back to the factory default
6.0 TROUBLESHOOTING
If any of the LM-404HDA’s LCD Monitors do not appear to be functioning properly, be
certain that the source and any other device connected to the unit is functioning
correctly by connecting each device currently connected to the LM-404HDA to another
monitor. (In other words, bypass the individual LM-404HDA to insure that the problem is
not with the source device.) If the signal is present under those conditions, make certain
that power is present to the LM-404HDA. If it is, check all cables for damage. Cables
should be undamaged, as short as possible and should be premium quality.
Note: It is strongly recommended that you use premium cables in order to achieve
maximum distance cable runs and the best performance possible.
After trying the above suggestions should the problem still persist, contact your dealer
for additional suggestions before contacting TV One. Should the dealer’s technical staff
be unable to assist you, contact TV One via our support website:
http://tvone.crmdesk.com. Create a technical support request on the site and our
support team will respond within a short period of time.
7.0 LIMITED WARRANTY
TV One warrants the original purchaser that the equipment it manufactures or sells will
be free from defects in materials and workmanship for a fixed term from the date of
purchase. The warranty term for specific product lines is defined below.
1.
TV One branded products based on TV One’s CORIO technology are warranted
for a period of five years from the date of purchase. This includes products with the
model number prefix of C2, 1T-C2, CX, A2 or S2.