TV One LM-1520R, Инструкция по эксплуатации

Страница: 11 / 16

9
An AC Adapter is included with each unit. Insert it into the holder located at the top, rear
of the unit. Connect its DC cable to the connector labeled
DC +12 and then connect the
included AC cable to the AC Adapter. Connect all input cables to the unit and lastly
connect the other end of the AC cable to the AC power source.
7.0 OPERATING THE UNIT
The LM-1520R and LM-1920R monitors are operated using front panel controls and an
On Screen Display (OSD). The controls consist of a group of six buttons located on the
lower center of the front panel. Please refer to illustration below and the discussion that
follows.
Power Switch : Pressing the button labeled ‘POWER’ will cause the LED at the extreme
right of the control panel to change color from Red to Green and power will be applied
to the monitor’s circuitry. Pressing the button again will cause the LED to glow with a
Red color and the power will be removed from the monitor’s circuitry.
Source Switch: Pressing the button labeled ‘SOURCE’ will step the inputs through all
possible signal input selections. Repeatedly press the button until you arrive at the
desired input.
Auto Switch: Pressing the button labeled ‘AUTO’ will cause the monitor to optimize the
picture any time a VGA source is present and selected. This function is only used when
VGA video is the selected signal.
Menu Switch: Pressing the ‘MENU’ button will cause the OSD menus to appear. When
an OSD Menu is active, the two adjust buttons become the controls for selecting
individual functions on the OSD and also are used to adjust functions once they are
selected.
Operationally, the Menu button is pressed and a menu item is selected by using the
Adjust switches (arrow keys) to move a cursor until it is over the desired menu item.
Once the cursor is over the menu item you want, pressing the Menu button again
selects the item. The adjust buttons are then used to make an adjustment or turn a
function on or off as appropriate.
There are several menus to choose from but the method of accessing and changing
menu items is always the same: Press the Menu button to begin the selection process,
move the cursor using the adjust buttons, press the menu button again to select the
desired activity or sub menu. Once you are at the desired menu item, use the adjust