background image

C2-6104A O

PERATION

M

ANUAL

3

2

IMPORTANT SAFETY INSTRUCTION

To insure the best from this product, please read this manual carefully.

Read these instructions

Keep these Instructions

Heed all warnings

Follow all instructions

Do not use this apparatus near water

Clean only with a dry cloth

Do not block any ventilation openings. Install in accordance with 
the manufacturer’s instructions

Do not install near any heat sources such as radiators, heat 
registers, stoves, or other apparatus (including amplifiers) that 
produce heat.

Do not defeat the safety purpose of the polarized or grounding-
type plug.  A polarized plug has two blades with one wider than 
the other.  A grounding type plug has two blades and a third 
grounding prong.  The wide blade or third prong are provided for 
your safety.  If the provided plug does not fit into your outlet, 
consult an electrician for replacement of the obsolete outlet.

Protect the power cord from being walked on or pinched 
particularly at plugs, convenience receptacles, and the point 
where they exit from the apparatus

Only use attachments / accessories specified by the 

manufacturer

Unplug this apparatus during lighting storms or when unused for 

long periods of time

Refer all servicing to qualified servicing personnel.  Servicing is 
required when the apparatus has been damaged in any way, 
such as power-supply cord or plug is damaged, liquid had been 
spilled or objects have fallen into the apparatus, the apparatus 
has been exposed to rain or moisture, does not operate 
normally, or has been dropped.

!

WARNING To reduce the risk of fire or electric shock, do 

not expose this apparatus to rain or moisture.

The  AC  power  cord  or  adaptor  furnished  with  the  unit  should 
conform  to  the  type  in  use  in  your  country.  Please  compare  the 
plug on your  cord or adaptor  with the power  socket where t he unit 
will be installed.

Содержание C2-6104A








































































































Отзывы: