TV One 1T-PC1280HD, Инструкция по эксплуатации

Страница: 8 / 12

6
5.0 OPERATING THE UNIT
The Scaler is controlled via three buttons and status is indicated by OSD.
Menu Button: This Button displays the Menu Options via the On Screen Display
on the display device connected to the output. 6.1 thru 6.7 detail the sub-menus.
+ and - Buttons : These Buttons allow navigation within the Menu and
adjustments of the parameters available.
XGA Reset : Simultaneously depressing the – and + buttons returns settings to
factory defaults and sets the output to XGA.
480p Reset : Simultaneously depressing the MENU and - buttons returns
settings to factory defaults and sets the output to 480p (1T-PC1280HD Only).
5.1 Input Setup
When this is selected, a sub-menu of clock and phase adjustments will appear:
Clock 32/64
Phase 22/32
Use + and – Buttons to choose the parameter you want to adjust and then press
the Menu (Enter) to highlight your selection. Once a parameter is highlighted,
use + and - Buttons to increase or decrease the value of the setting. Press Menu
again to leave the setting. Move the arrow to Exit and press Menu/Enter to Exit.
5.2 Output Setup
When this mode is selected, the following Output Resolution sub-menu appears:
PC HDTV
WUXGA 1920x1200@50/60Hz 720p-RGB 1280x720@60Hz
UXGA 1600x1200@60Hz 576p-RGB 720x576@60Hz
SXGA 1280x768@60/75Hz 480p-RGB 720x480@60Hz
1280A 1280x960@60Hz 1080i-RGB 1920x1080@60Hz (i)
XGA 1024x768@60/70/75/85Hz 1080p-RGB 1920x1080@60Hz
WXGA 1280x768@60Hz 720p-YPbPr 1280x720@60Hz
SVGA 800x600@60/72/75/85Hz 576p-YPbPr 720x576@60Hz
VGA 640x480@60/72/75/85Hz 480p-YPbPr 720x480@60Hz
VGA70 720x400@70Hz 1080i-YPbPr 1920x1080@60Hz (i)
VESA85 640x400@85Hz 1080p-YPbPr 1920x1080@60Hz
1152x864@70/75Hz
Use the + and – Buttons to choose the desired PC or HDTV output resolution
from the available selections in the sub-menu.