TV One 1T-HDMI-821, Инструкция по эксплуатации

Страница: 7 / 12

5
*Note: Proper operation of HDMI switchers depend on the use of the highest
quality cables available. The distance specification of 50 feet is for HDMI signals
up to 1080i resolution but cannot be guaranteed unless high quality cables are
used throughout the system.
5.0 OPERATING THE UNIT
Power and input selection are controlled from one multi-purpose switch. To turn
the switcher on, press the Input Select – Power On/Off switch. Once the unit is in
the operating state, pressing the switch causes the input selection to advance
each time it is pressed. (An LED will light to show which input is active.) Once the
highest input number is reached, pressing the switch again will select input
number 1. Pressing and holding the switch for two (2) seconds will cause the
unit to power off. For greater flexibility, an Infrared remote control is also
provided. In the case of the remote, there are separate buttons for the power and
input sources. Point the remote control at the unit and press the power button to
turn the switcher on or off. Press the appropriate input select button to cause the
desired input to appear on the switcher’s output.
5.1 Operation Using the Optional Extended IR Module
An optional IR extender accessory, Model 1T-IRR-100, is available for those
situations requiring the switcher to be mounted in a location where direct line-of-
sight is not available. If you have purchased the optional IR extension module,
connect it to the rear of the unit and position the module in a manner that allows
the furnished remote to be pointed at it without any obstructions between the
remote and the extended IR module. The 1T-IRR-100 is shipped with a 6 foot
interconnect cable. Operation using the extended IR module accessory is the
same as with the standard IR remote capability.