6
4.2
1T-CT-654A Receiver
1.
At the remote location, connect the Cat.5e/Cat.6 cable to the Receiver’s CAT5e/6
In port. Ensure that the RJ45 connector is securely locked into the receiver’s port.
2.
(OPTIONAL)
If there is an IR controllable device on the 1T-CT-654A side that you
wish to control remotely from the 1T-CT-653 side, connect the IR Emitter device to
the IR Tx connector on the 1T-CT-654A. If there is an IR controllable device on the
1T-CT-653 side that you wish to control remotely from the 1T-CT-654A side, connect
the IR Receiver device to the IR Rx connector on the 1T-CT-654A.
3.
Connect the HDMI port of the Receiver to the HDMI input of the remote display or
other device, using an appropriate cable, (1 Meter (~3’) in length for 12 bit signals, 10
meters (~33’) for 8 bit signals).
4.
If using the RS-232 control feature, connect the RS-232 device to the 1T-CT-654A
via the DB-9 port.
5.
If you wish to transmit Ethernet signals between the 1T-CT-653 and 1T-CT-654A,
connect an Ethernet cable/device via the RJ45 LAN port.
6.
(OPTIONAL)
If you wish to power the 1T-CT-654A locally then connect the 5v AC
power adapter’s DC power connector to the 1T-CT-653 Transmitter.
NOTE: If you
wish to use the 1T-CT-653 Transmitter’s PoH functionality to power the device
you should skip this step.
7.
Turn on the remote display and source device. Observe the Link LEDs on the
Transmitter and the Receiver. Both should be lighted.
