TV One 1T-CT-400 Series, Инструкция по эксплуатации

Страница: 10 / 14

8
4.2 1T-CT-400 Series Receivers
1. At the remote location, connect the other end of the Cat.5/5E or Cat.6 cable to
the UTP IN connector of the Receiver.
2. Connect the VIDEO OUT connector of the Receiver to the video input of the
remote display or other device, using the appropriate cable.
3. If the Transmitter and Receiver models chosen have audio capability, connect
the Receiver’s STEREO OUT and/or S/PDIF OUT connectors to remote display
or other audio device. Both audio outputs may be used simultaneously,
regardless of the audio signal format chosen at the transmitter.
4. Connect the supplied AC adapters first to the respective Transmitter and
Receiver and then to the AC sockets.
5. Lastly, turn on the source device and remote display. The source signal should
now appear on the remotely located display. If not, consult the Troubleshooting
section of this manual.