FCC Statement
Any Changes or modifications not expressly approved by the party responsible
for compliance could
void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following
two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause
undesired operation.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment .This equipment should be installed and operated
with minimum distance 20cm
between the radiator& your body.
FCC Label Instructions:
The outside of final products that contains this module device must display a label referring to the
enclosed module. This exterior label can use wording such as: “Contains Transmitter Module
FCC ID:
2ANDL-TYBT4L
”,or “Contains FCC ID:
2ANDL-TYBT4L
”,
Any similar wording that expresses the same meaning may be used.
Regulatory Module Integration Instructions
This device complies with part 15.247 of the FCC Rules.
The OEM integrator has to be aware not to provide information to the end user regarding how to install or
remove this RF module in the user’s manual of the end product which integrates this module.
The antenna is PCB Antenna and maximum gain is
2.0
dBi .
This module has been granted modular approval for mobile applications. OEM integrators
for host products may use the module in their final products without additional FCC certification if they
meet the following conditions. Otherwise, additional FCC approvals must be obtained.
The host product with the module installed must be evaluated for simultaneous
transmission requirements.
The user’s manual for the host product must clearly indicate the operating requirements
and conditions that must be observed to ensure compliance with current FCC RF exposure guidelines.
To comply with FCC regulations limiting both maximum RF output power and human
exposure to RF radiation, use this module only with the included onboard antenna.
The final host / module combination may also need to be evaluated against the FCC Part 15B
criteria for unintentional radiators in order to be properly authorized for operation as a Part 15
digital device.