Get started
3
3.3 Connect to the gateway's network
1.Install batteries for the device.
2.Reset the device. For details, refer to Chapter 2 > Reset button >
Reset instruction content to operate;
3.Open Tuya Smart APP to add devices. When the device is being
added to the network, the green indicator blinks continuously. After
the device is successfully added to the network or network add
timeout(one minute later), the green indicator will turn off.
Method 1:
Click the "+" icon in the upper right corner and choose Add
Device > Add Manually > Sensors > Motion Detector > Motion Detector
(ZigBee) for device addition.
Method 2:
Click one of your gateway and then tap the "+ Add
subdevice" to add device.
Note:
If failed, please repeat the above step and try again.
3.1 To get started, you will need:
1. A TUYA Gateway
2. A mobile installed Tuya Smart APP
3. A Tuya Zigbee Multi snesor
4. Two D cell batteries
