III USE OF PRODUCT
III.1 BEFORE USING FOR THE FIRST TIME
1.
Remove the appliance and various components from the packaging and ensure that
these are in good working order and show no visible damage. Do not use a damaged
appliance.
2.
Fill the keWle with cold water up to the maximum level indicated (1.7L).
3.
Boil the water twice without any addiHves.
4.
Ager doing this, you can start to use the appliance.
III.2 OPERATION OF THE PRODUCT
Temperature selec@on
1. Open the lid in order to fill the keWle.
2.
Fill the keWle with cold water only and respecHng the water level indicator (MIN-MAX).
Note: If the keDle is overfilled, boiling water may be ejected.
3. Close the lid by pressing it lightly unHl it locks (click).
4. Place the keWle on the heaHng base.
5. The blue light of the LED screen, the Keep hot buWon and the On / Off buWon lights up
at the same Hme, and then the Keep hot buWon light turns off. The LED screen shows
the current temperature of the water. If you do not perform any operaHon, it enters the
standby mode ager 5 seconds, and the LED screen automaHcally turns off ,Only the
blue light of the On / Off buWon is on.
6. Press the On / Off buWon to acHvate the LED screen and display the current water
temperature.
7.1 Automa@c boiling mode:
When the LED screen is acHvated, press the On / Off
buWon, the blue light will turn red light, and the keWle will automaHcally heat up to
100°C boiling.
7.2 Select temperature mode:
When the LED screen is acHvated, press the
temperature in) or temperature decrease(-)buWon to select the required
temperature, press the On / Off buWon, the blue light will turn red light, and the keWle
will automaHcally heat to the required temperature.
Note:You can choose your hea<ng temperature: between 40°C to 100°C thanks to the
