Tuttnauer LabSci 11-V, Руководство по эксплуатации и обслуживанию

Страница: 12 / 97

Page 11
3.2 Directives and Standards
Every autoclave meets the provisions of the following Directives and is in
compliance with the following Standards:
ISO 9001: Quality Management System
ISO 14001: Environmental Management System
ISO 17025: General requirements for the competence of testing
and calibration autoclaves
ASME Code Section I and section VIII. Div. I
PED 2014/68/EU
Chinese Regulations Special Equipment Licensing Office
IEC 61010-1 / UL 61010-1: Safety requirements for electrical equipment for
measurement, control, and laboratory use
– Part 1:
General requirements
IEC 61010-2-040: Safety requirements for electrical equipment for
measurement, control, and laboratory use
– Part 2-040:
Requirements for sterilizers and washer-disinfectors
used to treat medical materials
EN 61326-1: EMC Requirements for Electrical Equipment
3.3 Ordering Information
Several items must be specified when ordering the unit from your dealer.
•
The chamber diameter and chamber depth required
•
Please specify the supply voltage available (i.e. 115v/208v; 1Ph/3Ph)
•
The temperature scale needed (Celsius or Fahrenheit).
•
The pressure scale needed (kPa or psi)
3.4 Accessories
•
Baskets
– Different size baskets are available for these units. The
baskets are made of stainless-steel wire and have a handle. The
basket allows the operator to load a large quantity of materials into the
chamber.