Tuttnauer AMS10-120-T Скачать руководство пользователя страница 38

Страница: 38 / 104

7. Operating Instructions

The following are the operation instructions.

7.1 Turning on the Device

Plug the power cord into the socket on the rear panel of the autoclave (see the
rear view) and into the wall outlet.

Turn ON the semi-automatic ON/ OFF bottom Switch located on the rear panel
of the autoclave (see the rear view).

Turn on the ON/OFF switch mounted under the cover on the front of the
autoclave (see below)

7.2 Filling Water

Cautions!

In the beginning of each day, check water level in the reservoir.

Note:

Improper Water level icon

appears when the water reservoir needs

to be filled. (See the filling procedure in section 7.3 and Draining the Reservoir
procedure in section 8.11).

Page 31

Содержание AMS10-120-T









































































































Результаты поиска

Содержание AMS10-120-T

Отзывы:

Похожие инструкции для AMS10-120-T

Бренды по названию

Популярные бренды

Tuttnauer AMS10-120-T, Руководство по эксплуатации и обслуживанию

Результаты поиска

Содержание AMS10-120-T

Отзывы:

Похожие инструкции для AMS10-120-T

Бренды по названию

Популярные бренды