Fig. 3
Fig. 1
Fig. 2
Fig. 4
Fig. 5
BRAKE
To engage the brake push down the brake lever
with the foot in a way to lock the gear wheel which
is the part of the stroller rear axle.
In order to disengage the brake pull the
brake lever up with the foot. (It has
adjustable springs)
CARRYCOT AND SEAT UNIT ASSEMBLING
Insert carrycot at an angle (Fig. 1) in the hooks on the front of the chassis then push the
carrycot down to the locking fastener.
To release the carrycot unlock the fastener by pushing red locker (Fig. 2) on the both sides
of the chassis.
WARNING!
Before moving the stroller
make sure the brake is disengaged (released).
The manufacturer do not takes responsibility for
damages of gear wheels and other brake system
components resulting of disregard instructions
above.
Folding the chassis
To fold the stroller pull the locking devices along
the both sides of the chassis up to release the lock
and move the handles (Fig. 3)
To fold the carrycot hood, push the hood down, holding its upper part.
Handle in the hood is designed only for take the carrycot from out of the stroller.
Unfolding the chassis
Raise the handle to hear the
CLICK of locking elements.
(Fig. 4 and 5)
Make sure the
connectors are locked.
WARNING! Before use the the stroller make sure the seat unit is properly
locked in fasteners.
5-POINT HARNESS
The stroller is equipped with a 5-point safety
harness. Straps are adjustable
individual sections it means: waist strap
crutch strap and shoulder strap. Each of these
strips can be adjusted separately
moving the sliders located near the main lock.
REMEMBER!
USE A HARNESS AS SOON AS YOUR CHILD
CAN SIT UNAIDED.
Buyer is obliged to release the product or its
components required repair to the Guarantor in
order to transport them to the Guarantor's plant
and repair. The guarantor is not obliged to provi-
de product for replacement to the buyer at the
period ofperforming the warranty obligations.
