RF WIRELESS CAMERA SYSTEM
INSTALLATION AND USER GUIDE
8 |
P a g e
Guideline #1 adjustment:
o
Press
Enter key to select three types of guideline.
o
Press < Left key to move the guideline.
Wireless backup camera LED light On/Off
The wireless backup camera is equipped with an LED light that the driver can turn on or off from the
monitor by following the steps below:
1. On the guideline, press Right key to turn off the guideline.
2. On the off guideline, press Right to turn on or off the wireless backup camera LED light.
Pairing the wireless monitor with the wireless camera
The system is paired and ready to operation. In some cases user can re-pair the monitor and cameras
by following below steps:
1. Press the pair button on the back of the monitor for 5 seconds. The monitor will display
“PAIRING START”. The pairing time will be 60 seconds.
2. During the pairing time, press the pairing button on the camera until the monitor display “SAVE
DATA”.
3. After pairing success, the camera image will display on the monitor.
Troubleshooting:
NO SIGNAL: The monitor did not receive any data from camera. Please check the camera
power or re-pair the system.
Wait CH1 signal: Please check the camera’s power is on or re-pair the system.
Wait CH2 signal: Please check the camera’s power is on or re-pair the system.
