Install 50mm bolts here
Nut plate here
5. Place the top rack on the bike lining up the four holes and install the (2) M8 x 1.25 x 50mm flat
head bolts in the front two holes. Install the (2) M8 x 1.25 x 30mm flat head bolts into the rear two
holes. Install the two spacers and the M8 x 1.0 flange on the bolts in the front two holes. As shown
in the images below.
Tusk Top Rack: KTM 1090
Part#1580370008
Install 30mm bolts here
M8 nut and aluminum
spacer here
Nut Plate
7. Tighten all bolts and enjoy the use of your new Tusk Top Rack.
6. Install the nut plate under the rear of the rack. As shown in the images below.
