TURTLE
TOUGH
®
3
Safety Precautions
Before attempting to unpack, set up, or operate this instrument, please read this entire manual.
•
Make certain the unit is disconnected from the power source before attempting to service or remove any
component.
•
Make certain the unit is disconnected from other sources of force or pressure (for example, pneumatic or
hydraulic), before attempting to service or remove any component.
•
Failure to follow these precautions could result in personal injury and damage to the equipment.
General
This manual contains basic information to be noted during installation, operation and maintenance. It is therefore
essential that this manual be read by the contractor before installing and commissioning the system, as well as by
the relevant operating personnel/owner of the unit. It must remain available for reference at all times. In addition
to the general safety instructions under this main heading Safety Precautions, the special safety precautions
outlined in other sections must also be observed.
Warnings used in this manual
This manual contains vital information relating to the safety of people and the environment, the analyser and any
equipment attached. These statements are identified by the following symbols:
Danger
DANGER
Refers to an imminent danger.
Non-compliance can lead to death or extremely serious injury.
Warning
WARNING
Refers to a potentially hazardous situation.
Non-compliance can lead to death or extremely serious injury.
Caution
CAUTION
Refers to a potentially hazardous situation.
Non-compliance can lead to minor injury or property damage.
Notice
NOTICE
Appears in conjunction with safety instructions which may endanger the analyser
and its operation if disregarded.
Important
IMPORTANT
Draws attention to supplementary information to make the work easier and ensure
trouble-free operation. Markings that are affixed directly to the equipment must be
observed without fail and must remain fully legible at all times.
Disconnect electrical supply before working on this equipment.
