Page 6 of 9
TS40005EM Rev C
9.
Attach Wire Managers
Peel doubleface tape and attach wire managers as shown. Locate
one wire manager directly between the Top Plate circular cutout and
the Center Shelf circular cutout. Center the second wire manager 3
inches below the parallel printer controller terminal. Press firmly to
adhere wire manager to the back of the markeboard. Never attach
Wire Managers to the back of the tackboard. After Wire Managers
have been installed gently push the receiver wires into the Wire
Manager trough.
10.
Attach Power Strip (optional)
Using prepunched position holes, mount power strip mounting plates
to base using two (2) 10 - 16 x 1/2 sheetmetal screws. See power
strip assembly instruction P/N
939501344 for more information.
Snap power
strip onto mounting plates as shown.
3"