background image

 

3

 

 Debugging Functions 

Operating instruction

1.

After powered on, the LCD screen on the control board will display the default state showing the

current working mode.

2.

There are 4 buttons on the control board: UP, DOWN, ENT, and ESC, as shown in Figure 3-1.

UP:

 to move upwards or increase the value.

DOWN:

 to move downwards or decrease the value.

ENT:

 to enter a menu setting item or confirm the current modified value.

ESC:

 to return to the previous menu or cancel the current operation.

Menus

1. Position adjustment of the swing barrier

Type: zero (default)
Left limit

Right limit

2. Passing mode

Opening mode: Two-way swipe (default)

Left free, Right swipe

Left swipe, Right free
Two-way free

Left prohibit, Right swipe

Left swipe, Right prohibit

Left prohibit, Right free
Left free, Right prohibit

Two-way prohibit

3. Opening duration (Press ‘ENT’ to modify)

After the gate is opened, it will automatically close if no one passes through within a certain time

duration. The default value is 5 seconds. The value ranges from 2 to 60.

www.TURNSTILES.us | [email protected] | 303-670-1099

3

Содержание OTSG9000 Series









Отзывы: