[13]
I: Remote Lane Control -
Touchscreen Connection Options-
1) 485 communication – A Shielded/Stranded 18 -22 awg/4-conductor cable
rated for 485 communications is required to run from the control computer, to the
first lane’s PIO. Then daisy chain to each of the other lane’s PIOs (J19 + J20) in
order to operate the RLC with full functionality. Each PIO is addressed via the on-
board rotary switch from number 1 to the total number of lanes.
2) Ethernet – An Ethernet cable should be run from each PIO to a DHCP switch or
router, a separate cable should be run from the DHCP device to the control
computer. IPs will need to be saved to each PIO and then set in the computer.
J: Earth Ground
-
An earth ground is required to each pedestal’s base
for warranty coverage. Pictures of both ends of the ground are required to
enable warranty.
6.
REMOTE LANE CONTROLLERS (RLC)
(optional)
A: Push-Button Controller (RLC-PB)
Pictured above is the Pushbutton Remote Lane Controller (RLC-PB). Across the top of
the desktop controller provides the number of lanes controlled by this RLC. The left
column provides the functions that the turnstile is capable of operating remotely.
www.TURNSTILES.us / www.entrapass.com / 8641 S. Warhawk Road, Conifer, CO 80433 / 303-670-1099
