manualshive.com logo in svg

Turnstiles mWing, Руководство по эксплуатации


Поделиться
Скачать
background image

70

mWing

Electrical connection

8 

8.1 

Electrical connection

Safety during electrical connection

Qualification of personnel

› 

Technician

› 

Ma

nufacturer

 service expert

ä

Page 12, chapter 2.3.2.

Personal protective equipment

Wear the following personal protective equipment:

 ›

Work clothes

 ›

Protective gloves

 ›

Safety shoes.

 DANGER

Electric voltage

Touching live parts can be lethal. Damage to the insulation or to 

individual components can be lethal.

 ›

Only qualified electricians or electrical safety experts may

carry out work on the electrical system.

 ›

Before commencing any work, switch off power supply and

secure against restarting. Test for absence of voltage.

 ›

Keep moisture and dust away from live parts. Moisture or dust

may cause a short circuit.

 ›

If the electrical connection is established at precipitation, e.g.

rain or snow, intrusion of moisture must be prevented by 

suitable measures, such as a protective cover.

 ›

Protective devices that are required according to national and

local regulations, e.g. residual current devices, must be 

provided. These protective devices must be provided by the 

customer.

 ›

Observe the information on the type plate.

 ›

Close all covers after all work is completed.

www.TURNSTILES.us | [email protected] | 303-670-1099

Содержание mWing





























































































Отзывы:

Нет отзывов

Похожие инструкции для mWing

Бренды по названию

Популярные бренды

Загрузить еще бренды