Hextronik AIRplane [6-12]ESC Manual [ Model 2 ] Page 3 7/21/2014
x 3
Lipo 14S
x 3
3. Rotation Reverse
This function is to change the motor rotation direction.
(for example: Right to Left, or vice versa)
Reverse motor rotation
4. Acceleration
When gearbox drive system is used. It’s highly recommended to enable the Soft start.
Because it’s protecting the gearbox not to damage especially large diameter of propeller is used.
Disable the soft start function when direct drive system is used or being in speed competition
Low:
High:
5. Under Voltage
If the motor battery pack drops to the programmed cut-off voltage, the controller will either ignore, reduce
the motor speed or stop the motor to ensure that there is enough power for the receiver and servos. Either
one is active, you can resume to normal operation by pull down the throttle stick and push up again,
but
remember that it’s time to land you model!
Ignore
(motor won’t stop until battery total gone)
Reduce power:
(reduce motor speed)
Stop:
(stop motor)
6. Timing
The controller has three timing modes; Automatic works perfect for
ALL
types of brushless motor. But for some
brands or homemade brushless motors, you have to set the right timing for optimal efficiency and power; 7 degree for
multi-pole motors, 30 degree for out runner motors.
Automatic:
