Turner DataBank Скачать руководство пользователя страница 24 | Manualshive

Страница: 24 / 33

Turner DataBank Скачать руководство пользователя страница 24

998-2900

Rev L

24

4 Sensors and Cables

This section discusses the sensors and cables for the DataBank.

4.1 Sensors

The DataBank can be configured to work with Turner Designs Cyclops Sensors. For
information on how to configure the DataBank to work with Cyclops visit the following
web address:

DataBank with Cyclops Sensors

http://docs.turnerdesigns.com/t2/doc/manuals/998-2901.pdf

4.2 Cables

The DataBank comes configured with a sensor cable installed.  Turner Designs
cables are available in 0.6, 5, 10, 25, and 50 meter lengths.

The following are cable part numbers for use with Cyclops sensors:

P/N 105-2580    0.6 meter cable with locking sleeve
P/N 105-0585    5 meter cable with locking sleeve
P/N 105-0581    10 meter cable with locking sleeve
P/N 105-0582    25 meter cable with locking sleeve
P/N 105-0583    50 meter cable with locking sleeve

Note: The Handheld DataBank Datalogger P/N 2900-199 handle is sealed with

Marine Goop

to improve protection for moisture and humidity. If the cable

needs to be removed or replaced this seal will be broken. Turner Designs
advises the use of

Marine Goop

to reseal the handle.

«
...
22
23
24
25
26
...
»

Содержание DataBank


































Отзывы:

Нет отзывов