Turner Hastings Close Coupled Toilet, Руководство по установке

Страница: 14 / 16

CAUTION: Before undertaking any drilling check fully for hidden
wires/pipework within the floor/walls.
5) Remove the assembled WC pan from the wall and drill the marked points.
Insert the 8 x 60mm grey plugs for the floor fixing (solid floors only). Fixings for
the cistern are not provided so please use suitable fixings for your wall type.
6) Re-position the pan upto the wall and attached the waste pipe.
7) Connect the water inlet pipe to the inlet valve. It may be advisable to use
PTFE tape to help create a watertight seal between the inlet valve thread and
the connecting nut (not supplied)
8) Secure the WC pan to the floor/wall by using the fixings supplied/selected.
9) It is advised to run a bead of silicon around the joint between the WC outlet
pipe and the waste pipe to ensure a good seal.
10) Assemble the push button to the cistern lid and place into position.
11) Once you are satisfied that the pan has been installed correctly and the
fixings are adequately tightened switch on the water supply to the inlet valve
and once the cistern is filled operate the flush cycle.
12) Operate the flush cycle a few times and continually check carefully for
signs of leaks from the inlet valve or WC outlet if no leaks are evident your WC
installation is complete.
Fig 1.4 Fig 1.5
Installation Guide - TOILET FITTING INSTRUCTIONS