Turner Designs Ballast-Check 2, Руководство пользователя

Страница: 6 / 20

Ballast-Check 2 User’s Manual
6
2 Instrument Start Up
2.1 Inspection
Upon receiving your instrument, please inspect everything carefully and make sure all
accessories are included. The Ballast-Check 2 package comes in a carrying case that
includes:
•
Ballast-Check 2 inside a storage pouch (batteries installed)
•
Instrument-specific Calibration Check Standard (stored in the interior pocket of the
pouch's flap)
•
2 - glass 10x10mm cuvettes
•
60cc plastic syringe
•
3 - 10µm filter capsules
•
Filter Washing Kit
•
Kim Wipes
•
Wrist Strap
•
Data download cable P/N 021-0850
•
Quick Start Guide, User Manual and Data Report Software on USB flash drive
•
Laminated Calibration Certificate
•
Laminated Quick Start Guide
2.2 General Information, Precautions and Cleaning

Use caution around solvents, they may degrade the plastic case of the Ballast-Check 2.

If a sample is accidentally spilled inside the sample compartment, invert the Ballast-
Check 2 to drain out the excess liquid. Wipe the inside area dry with a clean soft
towel or tissue followed by a quick wipe using Kim Wipes.

If extra cleaning is needed, use a mild detergent to dampen the towel for cleaning.

Although Ballast-Check 2 floats, do not submerge it in water.

Do not expose Ballast-Check 2 to temperatures outside the specified range of
5 to 40 °C or damage may occur that will not be covered under warranty.
2.3 Instrument Power Up
Ballast-Check 2 is shipped with four standard AAA user-replaceable batteries installed.
The plastic battery tab at the back of the Ballast-Check 2 must be removed before use.
Grasp it firmly and pull gently to remove it, exposing the battery terminals enabling power to
the Ballast-Check 2.