Turn of the Century
TM
4
ASSEMBLY INSTRUCTIONS - FAN MOUNT
2
1
1. Turn OFF the electrical power at the main fuse or circuit
breaker.
3. Remove the three switch housing screws in order to
remove the switch housing (A) or switch housing cap
(B) from the existing fan. If applicable, remove any wire
connectors that connect wires from the fan to the switch
housing and/or disconnect the male and female plugs.
Note:
Save the three switch housing screws for later.
2. Select the configuration (A or B) which most closely
matches your fan. Most ceiling fans have either a
one-piece removable switch housing that connects to
a fitter plate (A) or a permanent switch housing with a
switch housing cap (B).
4
4. Use a screwdriver to push the plug button out of the
switch housing (A) or switch housing cap (B).
Switch Housing
Switch Housing
Switch Housing
Switch Housing
Plug Button
Plug Button
Switch Housing Cap
Switch Housing Cap
Switch Housing Cap
Switch Housing Screw
Switch Housing Screw
Fitter Plate
3
A
A
A
B
B
B
For ceiling mount, skip to page 7.