TurfTracker 3301
Foam Marking System
--- Versatile Mounting Options
--- Easy-Fill 2.0 Quart Container
--- 25-foot of Durable Vinyl Tubing
--- Fits Most Applicators Up to 8’ Wide
--- Easy Mounting
--- 30 Minute Run Time
--- Uses Ordinary Liquid Dishwashing Soap
--- Durable, Rust Proof Parts
--- Made in U.S.A.
Thank you for purchasing a Richway
TurfTracker
foam marking system.
Please read and follow all directions
carefully to ensure proper mounting
of the system and longevity of the
product. With its rustproof parts, the
TurfTracker
is designed to give you
great results for many years to come.
Assembly and Use Instructions Inside
Save for Future Reference
WHAT TO EXPECT WITH YOUR TURFTRACKER:
After about 30 seconds, your foam output should become
more consistent, with a drop of foam coming out of each
drop hose every 1-3 seconds. Foam output will become
sporadic after approximately 25-30 minutes of continuous
running. Once the foam solution level drops below 2” in
the tank, stop and refill the container. Performance of the
foam marking system will greatly decrease once the liquid
level drops below 2” in the tank. Normally, the foam will
stay on the ground from 10-30 minutes, depending on
weather conditions. The foam shouldn’t harm your lawn
or plants, but it is advisable to first test the foam in an
inconspicuous space to determine if your plants are
susceptible to any adverse effects from the foam.
CAUTION:
DO NOT GET FOAM IN YOUR EYES.
MAINTENANCE AFTER EACH USE:
Fill the tank with hot water and run for approximately
one minute. Thoroughly rinse the tank out with hot water.
Disconnect from battery. Make certain all components,
especially the tubing, are dry before storing in freezing
temperatures.
TROUBLE-SHOOTING:
Inadequate Foam Output-
** Check Airline Connections- Make certain air is not
leaking at the pump fitting and external and internal cap
assembly fittings
** Check Cap Assembly- Cap should be fitting tightly on
bottle
** Check Airline Tubing- Be sure that airline tubing is not
plugged from the pump to the bottom of the foam genera-
tion tube
** Check Foam Tubing- Make certain foam tubing is free
of any obstructions
** Use distilled water
** Try another brand of liquid dishwashing soap
** Increase the amount of liquid dishwashing soap used
in each batch
Runny Foam-
** Use less liquid dishwashing soap in each batch
** Only fill tank 3/4 full
Foam Going Into Air Pump-
** Replace check valve
Takes Too Long to Produce Good Foam-
** Use less liquid dishwashing soap
** Only fill tank 3/4 full
Questions, Comments, Information
Visit the Turf Tracker website:
www.turftrackernow.com
**Turf Tracker is a trademark of
Richway Industries, Ltd.
**Patent Pending
**
TurfTracker is a trademark of
Richway Industries, Ltd.
** Patent Pending
