© Trynex International 2009 L1302
1 — 5
Safety
Before attempting any procedure in this book, these safety instructions must be read and understood by all workers who
have any part in the preparation or use of this equipment.
For your safety
warning and information decals have been placed on this product to remind the operator of safety precautions.
If anything happens to mark or destroy the decals, please request new ones from Trynex.
Unit must be strapped down and locked into position before operating vehicle.
Never exceed the Gross Vehicle Weight Rating of vehicle. Failure to do so may limit a vehicles
handling characteristics.
Never attempt to take a unit off with material in it.
Do not drive at excessive speeds when loaded spreader is attached to vehicle. Braking distances may
be decreased and handling characteristics may be impaired at higher speeds.
Never
allow children to operate or climb on equipment.
Always check areas
to be spread to be sure no hazardous conditions or substances are in the area.
Always inspect unit for defects:
broken, worn or bent parts, weakened areas on spreader or mount.
Always shut off
vehicle and power source before attempting to attach or detach or service spreader
unit. Be sure vehicle/power source is properly braked or chocked.
Always keep hands, feet, and clothing away from power-driven parts.
Remember
it is the owner’s
responsibility to communicate information on safe usage and proper maintenance of all equipment.
Always make sure personnel are clear
of areas of danger when using equipment. Maintain 60'
distance from all bystanders when operating the spreader.
Inspect the unit periodically for defects. Parts that are broken, missing, or worn out must be replaced
immediately. The unit, or any part of it should not be altered without prior written permission from
the manufacturer.
Never use with foreign debris in the spreader. These units are designed to handle clean,
free-flowing material.
Note: Can not spread water softner salt.
R
Содержание TS-1200-E
