TURFCO 85399 Скачать руководство пользователя

Страница: 3 / 21

85399 Rev B

Specifications

Intended Use:

The TurnAer XT8 Aerator is a self-propelled coring tine riding aerator. The XT8 Aerator

is intended to be used for the aeration of the turf at a properly prepared worksite. The XT8 Aerator is NOT

intended to be used for any purpose other than the aeration of turf. The XT8 Aerator is designed for and

intended to accept a ride-on operator.

SPECIFICATIONS

Contact TURFCO to order parts or to arrange repair

service. For a list of authorized TURFCO dealers in

your area, or for additional information regarding the

TurnAer XT8 Aerator, direct inquiries to TURFCO.

TURFCO

1655 101

Avenue North East

Minneapolis, MN 55449-4420 USA
Telephone (763) 785-1000

FAX (763) 785-0556

Internet - www.turfco.com

E-mail - [email protected]

To ensure safety and proper operation, always

purchase genuine TURFCO replacement parts from

an authorized TURFCO dealer. Replacement parts

from other sources may damage the XT8 Aerator

and/or create a safety hazard. Always refer repairs to

properly trained service personnel.

DO NOT ALTER the XT8 Aerator in any manner.

Unauthorized alterations may affect its operation,

performance, and may result in injury or death to the

operator as well as other individuals in the work area.

How To Order Parts And Service

Patents and Registered Trademarks

Covered Under US Patents 6,708,773 and 8,632,018 - Additional Patents Pending

TURFCO

is a registered trademark of Turfco Mfg., Inc.

TurnAer™, XT5™ and XT8™ are registered trademark of Turfco Mfg., Inc.

Aerator Width

...................

47-3/4” Inches (121.28 cm) Across Rear Tires

Aerator Length

.................

69-1/2” Inches (176.5 cm) Front Tires to Operator Platform (Lowered)

Aerator Height

..................

54” Inches (137.1 cm) Ground to top of Fixed Handlebar

Weight

...............................

985 Pounds (447 Kg)

Aerating Rate

...................

Up to 92,400 sq ft per hour / 10,266 sq yds or 2.12 acre

(8584 sq meter per hour) based on 30” at 7 mph

Tine Wheels

......................

8 Tine Wheels, 6 Tines Per Wheel - Total 48 Tines

Aerating Width

.................

30” Inches (762 mm)

Aerating Depth

.................

Adjustable Range 1-1/2” to 5” Inches (38.5 to 127 mm)

Aerating Hole Pattern

......

3.8” Inches x 5.5” Inches (96.5 mm x 139.7 mm)

Tines

.................................

Coring Type, 3/4” Inch (19 mm Diameter) Heat Treated Alloy Steel

Engine

..............................

Briggs and Stratton® 724cc 22 HP Commercial Series (16.4 kW)

with electric start, gasoline

Drive

..................................

Hydraulic Drive to Steering/Drive Motors, Chain Drive to

Rear Wheels and Tines

Battery

..............................

12 Volt DC Battery (Customer Supplied) Group U1

Содержание 85399






















Результаты поиска

Содержание 85399

Отзывы:

Похожие инструкции для 85399

Бренды по названию

Популярные бренды

TURFCO 85399, Руководство оператора

Результаты поиска

Содержание 85399

Отзывы:

Похожие инструкции для 85399

Бренды по названию

Популярные бренды