background image

AERATOR PRO   

SAFETY

 

 

  Care  should  always  be  taken  when  mounting  and 

dismounting  a  riding  machine.  Prevent  injuries  and 
falls  by  making  sure  the  operator  does  not  slip.   
Unless it is an emergency, do not jump off a machine. 
Injury may result when an operator's foot slips trying to 
jump from a machine.   

  If required to lift, an operator should ask for help if the 

object  is  too  heavy.  The  operator  should  lift  with  the 
legs  instead  of  the  back.  Care  should  be  taken  to 
avoid twisting the back while lifting a heavy load. 

  Never allow children to operate the machine. 

 

THE MACHINE:

   

  Do  not  modify  the  machine  in  any  manner.  Always 

check the machine to make sure it is in good working 
order. 

  Tow vehicles must have adequate hitches and brakes 

to control any towed machine.    Check the weight and 
capacity  of  the  machine  that  will  be  towed  by  that 
vehicle. 

  Do  not  place  hands  or  feet  near  moving  or  rotating 

parts.  Check  that  all  guards  are  functional  and 
properly  installed.  Do  not  operate  a  machine  without 
all guards installed. 

  Check the condition of the hydraulic hoses. Leaks and 

worn  hoses  should  be  fixed  or  replaced  before  the 
machine is put into service. Do not use your fingers or 
hands  to  check  for  hydraulic  leaks.  High  pressure 
leaks can puncture the skin and force oil into the body. 
This can cause severe injury or death. 

  Check tires. Inflate to pressure shown on tire. 

  Check to assure that all controls are in good operating 

condition.   

  Check  to  assure  that  the  brakes  are  operating 

properly. 

  Do  not  overload  machinery.  The  components  are 

designed 

for 

certain 

weights 

and 

capacities. 

Overloading machine will cause unsafe conditions. 

  Shut  off  the  engine  before  servicing  the  machine. 

Check machines on a level area. Machines on a slope 
may roll when the engine is off. 

  Refer unfamiliar repairs and adjustments to mechanics 

that have been trained to do them properly. 

  Replace decals that are damaged or illegible. 

 

THE ENGINE:

   

  Do  not  run  the  engine  in  an  enclosed  area.  The 

exhaust  gases  contain  carbon  monoxide,  an  odorless 
and  deadly  poison. 

The  engine  exhaust  from  this 

product  contains  chemicals  known  to  the  State 
of  California  to  cause  cancer,  birth  defects  or 
other reproductive harm.

 

  Do  not  refuel  machines  indoors  or  in  an  unventilated 

area.  Do  not  over  fill.  Do  not  add  fuel  while  the 
machine is hot because spilled fuel may cause a fire. 

  Pull the starter cord slowly until resistance is felt. Then 

pull  the  cord  rapidly  to  avoid  kickback  and  to  prevent 
hand or arm injury. 

  Use fresh gasoline. Stale fuel can gum the carburetor 

and  can  cause  leakage.  Check  the  fuel  lines  and 
fittings frequently for cracks and leaks. 

    Do not remove the fuel tank cap or fill fuel tank while 

the  engine  is  hot  or  running.  Allow  the  engine  to  cool 
before refueling. 

  Do not operate the engine if gasoline is spilled. Do not 

operate  the  engine  when  the  smell  of  gasoline  is 
present  or  if  any  other  explosive  conditions  exist. 
Move the equipment away from the spill and avoid any 
ignition until the gasoline has evaporated. 

  Do not store, spill, or use gasoline near an open flame. 

Do  not  store,  spill,  or  use  gasoline  near  a  stove, 
furnace,  water  heater,  or  appliance  that  uses  a  pilot 
light or can create sparks. 

  Do  not  choke  the  carburetor  to  stop  the  engine. 

Whenever  possible,  gradually  reduce  the  engine 
speed before stopping. 

  Do not tamper with the governor springs, links or other 

parts to increase the engine speed. Run the engine at 
the speed set by the equipment manufacturer. 

  Keep  the  cylinder  fins  and  the  governor  parts  free  of 

dirt, grass, and debris which can affect engine speed. 

  Do not transport the engine with fuel in the tank. 

  Prevent accidental starting by removing the spark plug 

wire(s)  when  servicing  the  engine  or  the  equipment. 
Disconnect the negative wire from the battery terminal 
if  the  engine  is  equipped  with  an  electric  starting 
system. 

  Do not strike the flywheel with a hammer or any hard 

object.  This  may  cause  the  flywheel  to  shatter  during 
operation.  Use  the  correct  tools  to  service  the 
machine. 

  Do  not  check  for  a  ignition  spark  with  the  spark  plug 

removed. Use an approved tester. 

  Do not crank the engine with the spark plug removed. 

If  the  engine  is  flooded,  place  the  throttle  in  fast  and 
crank until the engine starts. 

  Do not start the engine with the air cleaner and/or the 

air cleaner cover removed. Do not operate the engine 
without a muffler. Replace the muffler if it is leaking or 
worn.  Replace  only  with  correct  muffler.  Do  not  touch 
a hot muffler, cylinder, or fin. It will cause burns.   

  Do  not  operate  the  engine  with  an  accumulation  of 

grass,  leaves,  or  other  combustible  material  in  the 
muffler area. 

  Do  not  use  the  engine  on  any  forest  covered,  brush 

covered,  or  grass  covered  unimproved  land  unless  a 
spark  arrester  is  installed  in  the  muffler.  The  spark 
arrester must be maintained in good working order. In 
the  State  of  California,  the  above  is  required  by  law 
(Section  4442  of  the  California  Public  Resources 
Code).  Other  state  may  have  similar  laws.  Federal 
laws apply on federal lands. 

 

This  list  includes  many,  but  not  all,  general 
safety  instructions  as  they  relate  to  turf 
equipment.  Common  sense  must  always  be 
used to determine the safest way to operate a 
machine under specific conditions.

Содержание 85380

























Отзывы: