turck TXF700 Series, Инструкция по эксплуатации

Страница: 18 / 29

Commissioning
Programming with TX VisuPro
18
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com
„
Click on the desired device.
„
Click Change or press [F2].
„ Change the IP address and the net mask, if necessary.
„ Accept the changes with Set in device .
Fig. 11: Turck Service Tool – changing the IP configuration
7.6 Programming with TX VisuPro
Prerequisites
n
For programming the HMI/PLCs with TX VisuPro, the software tool has to be installed on a PC
computer running Microsoft Windows.
7.6.1 Transferring TX VisuPro to the device
There are two options to transfer a TX VisuPro runtime project to a device:
n
Via Ethernet
n
Via a USB stick
Project transfer via Ethernet
„ Connect the HMI device to the computer with an Ethernet network.
„ Execute the command Run/Download in TX VisuPro. You may have to ensure that the
proper firewall policy has been configured in the computer to allow TX VisuPro to access
the network.
Project transfer via a USB stick
„
Create an update package with TX VisuPro and copy it to a USB stick.
„
Connect the USB stick to the device using a suitable Y-splitter PoE cable with USB port
(TXF-M22G-RJ45-5M-USB-1M [
}
11]).