turck TN-IOL2 Series, Инструкция по эксплуатации

Страница: 11 / 36

V01.00 | 2021/05
11
5 Installing
5.1 Installing cylindrical devices
The maximum tightening torque of the housing nut is 25 Nm (M18 design) and 70 Nm (M30
design).
„ Install the device with the appropriate fixing accessories so that the front cap of the
devices fully protrudes from the surrounding area.
„
Observe the minimum distances between read/write heads.
Fig. 5: Mounting distances
a b c d
M18 30 mm 54 mm 60 mm 10 mm
M30 45 mm 90 mm 90 mm 10 mm
„ Avoid metal in the proximity of the read/write head. Metal rails or similar objects must
not intersect the transmission zone.
„
Protect the device from heat radiation, rapid temperature fluctuations, severe contamin-
ation, electrostatic charge and mechanical damage.