turck TBEN-S2-2COM-4DXP, Инструкция по эксплуатации

Страница: 72 / 171

Commissioning
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com 66
7.4.8 Ethernet Link Object (0xF6)
The following description of the Ethernet Link Object is taken from the CIP specification, Vol. 2, Rev.
1.1 by ODVA & ControlNet International Ltd. and adapted to the Turck products.
Class attributes
Instance attributes
Interface flags
Attr. No. Attribute name
G
et/
S
et Type Value
Dec. Hex.
1 0x01 REVISION G UINT 1
2 0x02 MAX OBJECT INSTANCE G UINT 1
3 0x03 NUMBER OF INSTANCES G UINT 1
6 0x06 MAX CLASS IDENTIFIER G UINT 7
7 0x07 MAX INSTANCE ATTRIBUTE G UINT 6
Attr. No. Attribute name
G
et/
S
et
Type Description
Dec. Hex.
1 0x01 INTERFACE
SPEED G UDINT Speed in megabit per second.
(e. g. 10, 100, 1000, etc.)
2 0x02 INTERFACE
FLAGS G DWORD see
Interface flags
, s.
p. 66
3 0x03 PHYSICAL
ADDRESS G ARRAY OF
USINT Contains the interface’s MAC address
(Turck: 00:07:46:××:××:××)
6 0x06 INTERFACE
CONTROL 2 WORD Allows port-wise changes of the Ethernet-
settings
7 0x07 INTERFACE TYPE
10 0x0A INTERFACE
LABEL
Bit Name Definition Default value
0 Link Status Indicates whether or not the Ethernet communi-
cations interface is connected to an active net-
work.
0 = inactive link
1 = active link Depends on applica-
tion
1 Half/full duplex 0 = half duplex
1 = full duplex
If the Link Status flag is 0, the value of the Half/
Full Duplex flag is indeterminated. Depends on applica-
tion