turck LUS211 Series, Инструкция по эксплуатации

Страница: 28 / 41

Setting
28
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com
Explanation Options Function
dAP Damping of switching output
(filter) Filter for momentary or high frequency measurement
peaks: 0…8 s in increments of 0.01 s (0 = filter is
deactivated)
Default: 0.0
dAA Damping of analog output Filter for momentary or high frequency measurement
peaks: 0…8 s in increments of 0.01 s (0 = filter is
deactivated)
Default: 0.0
P-n Behavior of the switching output Auto Automatic detection (NPN/PNP)
NPN N switching
pnp P switching
diSr
Display orientation
0°
Display rotated by 0°
180° Display rotated by 180°
diSu Measured value display 50 50 ms update time
200 200 ms update time
600 600 ms update time
Off Display update deactivated
coLr Display color GrEn Always green
rEd Always red
G1ou Green if ou1 is switched, otherwise red
r1ou Red if ou1 is switched, otherwise green
G2ou Green if ou2 is switched, otherwise red
r2ou Red if ou2 is switched, otherwise green
G-cF Green if the measured value is between switching
points cFL and cFH
r-cF Red if the measured value is between switching
points cFL and cFH
Duni Display of measured value and
unit Measured value and unit are displayed alternately
(measured value: 4 s, unit: 1 s)
Off Unit is not displayed.
ON Unit is displayed.
cFH
Virtual upper switching point Upper switching point at which the display changes
color (if display color G-cF or r-cF is selected)
(default in distance mode:
0.5 × measuring range)
cFL Virtual lower switching point Lower switching point at which the display changes
color (if display color G-cF or r-cF is selected)
(default in distance mode:
0.75 × measuring range)
PASS Password protection Define password and activate password protection
0000 No password