■
TROUBLESHOOTING
PROBLEM
EASY SOLUTION
Machine does not
work
* There is a safety interlock switch on processing
bowl / blender. Please sure bowl and lock are
securely locked into position.
* If the motor still will not start, check the power
cord and power outlet.
French Fried
Potato Julienne
Disk
* Always clear any blocked potato from the
chipper disc before processing more potatoes.
Some food remains
on the disc after
processing
* It is normal for small pieces to remain after
processing.
Motor slows down
when mixing
dough
* Amount of dough may exceed maximum
capacity. Remove half and process in two batches.
Dough is too dry
* Running machine and add water through feed
cube, 1 tablespoon at a time until dough cleans
the inside of the processing bowl.
Dough is too wet
* Running machine and add flour through feed
cube, 1 tablespoon at a time until dough cleans
the inside of the processing bowl.
Motor slow down
when chopping
blade
* Amount of meat may be too much. Remove half
and process in two batches.
* For the best result, trim the meat of fat before
processing.
Vibrates/moves
during processing
* Clean and dry the rubber feet at the bottom of
the unit.
* Also make sure that the maximum load capacity
is not being exceeded.