4.
You can also dean the cyclone insert and the HEPA filter under lukewarm
water. Allow both to air dry completely before reinstalling them.
5.
Rinse the dust container under lukewarm water, dry it with a soft cloth and
then let it air dry completely.
6.
Then put all the parts back into the device and close the flap so that it
engages. Attention: The device may only be put into operation if the dry
cyclone insert and HEPA filter are correctly inserted again and the dust
container is inserted.
CLEANING THE VACUUM CLEANER
•
When the device is switched off and disconnected from the charger, you can
wipe the device with a dry doth.
•
Do not use abrasive rags, steel wool, abrasive cleaners, acetone or alcohol.
•
Never immerse the vacuum cleaner in water.
•
Store the device in a dry, cool place out of the reach of children.
CLEAN THE ELECTRIC FLOOR NOZZLE
Hair and lint can get caught in the brush, which must be removed from time to
time so that the suction power does not deteriorate.
1.
Slide the button on the bottom of the floor nozzle to the left and remove
the cover.
2.
Remove the cylinder brush. Use scissors to cut the hair and lint caught in
the
cylinder brush and remove them.
3.
After cleaning, put the cylinder brush back in the nozzle, put the cover on it
and push the button to the right again.