Turbosound TXD-115, Руководство пользователя

Страница: 6 / 27

user manual
TXD series
TXD series manual
page 6
The crossover incorporates a two stage thermal overload protection system which prevents
damage to the high frequency driver, reacting instantly to large transient peaks while still allowing
wide dynamic range to be maintained. Although the protection system is transparent at normal
operating levels, as the level increases the signal is gradually and imperceptibly compressed once
the critical threshold has been reached.
The cabinet is constructed from 15mm (5/8”) birch plywood, screwed and glued together for
maximum rigidity. A pole mount socket is fitted for use with optional 35mm poles and
loudspeaker stands. Two recessed flush handles are provided for easy lifting and carrying and four
rubber feet are fitted to the bottom of the cabinet. A grey powder-coated perforated steel mesh
grille protects the drivers from damage.
M10 rigging points are provided on the top and rear of the cabinet to enable it to be suspended
and angled in permanent installations using shoulder eyebolts. M8 rigging points are provided on
the rear of the cabinet for use with Turbosound wall and ceiling brackets, and these are also
compatible with PowerDrive™ wall and ceiling brackets. Two Neutrik Speakon NL4MP speaker
connectors are located on the rear panel, providing input and parallel connections to additional
TXD series cabinets or bass enclosures.
TXD-115
The TXD-115 is a front-loaded low frequency loudspeaker enclosure designed to give bass and
sub-bass reinforcement to TXD series 2-way enclosures in a wide variety of live sound
applications, as well as in fixed installations ranging from cafes, pubs, bars and restaurants to
retail stores and houses of worship.
It consists of a reflex-loaded 15” low frequency driver in an optimally tuned rectangular enclosure.
The TXD-115 includes a low-pass crossover network which filters high frequency signals from the
bass driver when used in conjunction with 2-way enclosures such as the TXD-121 or TXD-151,
enabling a full range system to be powered from a single amplifier channel without the need for
external electronic crossovers.
The enclosure is fitted with internal M10 threaded rigging points on the top and rear, which allow
single cabinets to be suspended and angled in fixed installations using optional M10 shoulder
eyebolts.
The cabinet is constructed from 15mm (5/8”) birch plywood, and is finished in a durable semi-matt
textured TurboBlue™ paint. Two flush handles are provided on the sides for easy lifting and
carrying, and four rubber feet are fitted to the bottom of the cabinet. Two Neutrik Speakon NL4MP
connectors provide input and parallel connections to additional TXD series cabinets.