Turbosound TCS52C-T-WH, Быстрый старт

Страница: 7 / 8

12 TCS52C-T-WH/TCS32C-T-WH Quick Start Guide 13
Technical Specifi cations
Painting before Installation
The loudspeaker’s white fi nish matches most décor
schemes and does not need further fi nishing.
However where interior design requires an
alternative colour this can be easily accomplished.
The loudspeaker can either be painted before
installation, or where the rim needs to be fi nished at
the same time as the ceiling the rim can be painted
after locating in the ceiling. The speaker will accept
almost any type of emulsion or oil-based paint.
Two coats are recommended.
Clean the rim and grille with a light solvent such
as white spirit. Do not use gasoline, kerosene,
acetone, MEK, paint thinner, harsh detergents or
other chemicals, all of which may damage the
loudspeaker. After cleaning, apply two coats of
paint, using a roller or brush, or by spraying.
Painting the Speaker with the Ceiling
Using the paint shield provided, paint the speaker
and remove the shield. To paint the grille,
fi rst remove the logo and grille cloth backing.
It is advisable to spray the grille to avoid the mesh
becoming clogged with paint from a roller or brush,
which may impair the sound quality. Replace the
grille cloth and the logo.
Other important information
1. Register online. Please register your
new MUSIC Group equipment right after
you purchase it by visiting turbosound. com.
Registering your purchase using our
simple online form helps us to process your
repair claims more quickly and effi ciently.
Also, read the terms and conditions of our
warranty, if applicable.
2. Malfunction. Should your MUSIC Group
Authorized Reseller not be located in your
vicinity, you may contact the MUSIC Group
Authorized Fulfi ller for your country listed
under “Support” at turbosound. com.
Should your country not be listed, please
check if your problem can be dealt with by
our “Online Support” which may also be
found under “Support” at turbosound. com.
Alternatively, please submit an online warranty
claim at turbosound. com BEFORE returning
the product.
3. Power Connections. Before plugging
the unit into a power socket, please make
sure you are using the correct mains voltage
for your particular model. Faulty fuses must
be replaced with fuses of the same type and
rating without exception.
Important information
TCS32C-T-WH TCS52C-T-WH
System
Frequency response
120 Hz – 20 kHz ±3 dB
100 Hz – 20 kHz -10 dB 90 Hz – 20 kHz ±3 dB
75 Hz – 20 kHz -10 dB
Nominal dispersion 150° conical @ -6 dB point 110° conical @ -6 dB point
Power handling (IEC)
Passive 30 W continuous, 120 W peak 60 W continuous, 240 W peak
100 V line 30, 15, 7.5 W continuous 60, 30, 15 W continuous
70 V line 30, 15, 7.5, 3.75 W continuous 60, 30, 15, 7.5 W continuous
Sensitivity 87 dB (1 W @ 1 m) 92 dB (1 W @ 1 m)
Maximum SPL
Passive 102 dB continuous, 108 dB peak 110 dB continuous, 116 dB peak
100 V line 108, 105, 102 dB peak 116, 113, 110 dB peak
70 V line 108, 105, 102, 99 dB peak 116, 113, 110, 107 dB peak
Impedance 16
Ω
16
Ω
Crossover type Passive Passive
Components
1 x 3.5" (89 mm) LF driver
1 x 1" (25 mm) HF driver 1 x 5" (127 mm) LF driver
1 x 1" (25 mm) HF driver
Enclosure
Connectors 1 x Phoenix 1 x Phoenix
Wiring Input 1+ / 1-, link 2+ / 2- Input 1+ / 1-, link 2+ / 2-
Dimensions (dia, depth) 235 x 83 mm (9.3 x 3.3") 268 x 188 mm (10.6 x 7.4")
Hole cut-out dia. 215 mm (8.5") 240 mm (9.4")
Minimum mount depth 110 mm (4.3") 210 mm (8.3")
Net weight 2.4 kg (5.3 lbs) 3.4 kg (7.5 lbs)
Construction UL-V0 ABS, steel fi re can UL-V0 ABS, steel fi re can
Finish White, paintable White, paintable
Grille Powder-coated perforated steel Powder-coated perforated steel
Attachment Rotating screw clamps Rotating screw clamps
Accessories
C-Ring and tile bridge – included C-Ring and tile bridge – included