Turbosound Siena TSP118B-AN, Быстрый старт

Страница: 7 / 11

12 TSP-AN Series Quick Start Guide 13
TSP-AN DSP Menu Structure
Fullrange Subwoofer Function
PROCESS
EQ
None None Sets the frequency response to the default setting.
Live Live Sets the frequency response to a typical live sound setting.
Speech Speech Sets the frequency response for optimal speech intelligibility.
Playback Playback Sets the frequency response ideal for music playback.
User User
Lets you defi ne your own frequency response setting by
entering the corresponding sub menu.
Sub menu
Low/ High Shelving Low/ High Shelving Lets you defi ne a low and high shelving fi lter.
Parametric 1 & 2 Parametric 1 & 2
Lets you defi ne a parametric bell-type EQ (Frequency, Qual.
and Gain).
XOVER
None - Unit is set for default full range / subwoofer reproduction.
HP 120 Hz LP 120 Hz
Preset with 120 Hz 24 dB / octave fi lter for crossover
between subwoofer and full-range speakers.
HP 100 Hz LP 100 Hz
Preset with 100 Hz 24 dB / octave fi lter for crossover
between subwoofer and full-range speakers.
- TSP122
Preset with ideal settings for use in combination with
TSP122 fullrange speaker.
- TSP152
Preset with ideal settings for use in combination with
TSP152 fullrange speaker.
TSP118B - Preset with high pass alignment for TSP118B subwoofer.
User User
User crossover sub menu for combination with other
fullrange or subwoofer speaker systems
Sub Menu
Freq Freq
Select the desired crossover frequency:
Fullrange systems: 75 Hz to 400 Hz
Subwoofer systems: 50 Hz to 150 Hz
Phase Phase Adjust the absolute phase (0° or 180°).
FBQ
Auto Auto
Automatically sets as many fi lters as required. Whenever a
new feedback frequency is discovered, the fi rst fi lter will be
released to attenuate the new frequency, and so forth.
Single Single
Activates the FBQ (feedback detection) functionality, up to
8 feedback fi lters
Learn Learn
Automatic procedure which searches for feedback
frequencies and locks settings after all 8 fi lters have been
set.
WARNING!
Please use ear protection during
this procedure. The feedback signal
may approach the system’s maximum
level, which may cause hearing damage!
Reset Reset Resets all fi lters.
SETUP
(page 1)
INPUT
Input Input
Lets you choose the audio input source. Choose between
Local (analogue Input) or ULTRANET (e.g., P16 monitoring
system or M32 audio via ULTRANET).
Volume Volume
Adjusts the input gain. With ULTRANET digital inputs over
a range from+ 10 dB to - 30 dB. With analogue input from
0 dB to -∞ dB.
Sensitivity Sensitivity
Adjusts input sensitivity for maximum output when using an
analogue 4 dBu for normal operation, + 14 dBu for
high level input.
POSITION
Stand Floor
For positioning the speaker on a pole mount stand
(fullrange) or on the fl oor (subwoofer).
Fullrange Subwoofer Function
Wall Wall
For positioning the speaker on or next to a wall (fi xed
install); alternatively as a monitor speaker (wedge).
Ceiling -
For positioning the speaker on a wall next to the ceiling
(fi xed install).
Corner Corner
For positioning the speaker in a corner next to the ceiling
(fi xed install); For positioning the speaker in a corner
(subwoofer).
DELAY
Delay Delay
Adjusts the amount of delay
(max 300 msec = 103.08 m or 338.19 feet).
Unit Unit Selector between msec, meter and feet.
LIMITER
Limit Limit
Adjust the limiter threshold for the input signal (from OFF
down to -30 dB). This threshold adjustment allows you to
set a max output power which is below the speaker system’s
rated max output.
SETUP
(page 2)
Version Version Displays the installed fi rmware version.
LOAD
1. - 20. 1. - 20.
To load a specifi c preset, turn the encoder to select the
desired peset's number, and then either the ENTER button or
the encoder. When asked to confi rm press the encoder again
or EXIT to abort.
SAVE
1. - 20. 1. - 20.
To save a preset choose the respective preset slot and press
ENTER or the encoder.
Sub Menu
Save Preset Save Preset
Name the preset by choosing the characters with the
encoder and pressing to confi rm each character. When
fi nished, press the ENTER button to save the preset.
SETUP
Contrast Contrast Adjust LCD panel contrast, The default contrast value is 15.
Screen Screen
ON: LCD screen saver (default) turns on automatically after
approx. 2 minutes.
OFF: LCD turns off automatically after approx. 5 minutes.
Logo Logo
OFF: Deactivates front panel logo illumination. ON: Activates
front panel logo illumination. LIMIT: Logo will light up when
the limiter is active.
Sub Menu
Lock Lock
Lock the device and create a password by choosing the
password characters with the encoder and pressing to
confi rm each character. When fi nished press the ENTER
button. Unlock the device by entering the password or
connecting the unit via USB to a PC running proprietary
remote software. The software does not require a password.
Warning Warning
In case of overheating, an alert appears on the LCD screen,
and the amplifi er will shut down until the unit cools.
LCD Graphic Indicator
To help the user immediately recognize that a parameter has been selected and changed from the initial default setting, the parameter’s related text on the top-level
screen will invert and change to black text on a white background. As an example, the following screenshots show how the text for the EQ function changes when the
TSP-AN default EQ setting has been changed:
This indicator function occurs only on the main DSP menu level and works for all DSP-related functions, except for the LOAD, SAVE and SETUP sub-sections on the
second page of the top-level SETUP menu.