1
TWMIOM-2
Installation:
• Toester Wall-Mount hydronic fan coils are suitable for
connection to a hot water supply at any pressure up to 300
psi with a maximum water temperature of 200°F.
• Building codes and plumbing regulations may vary.
Check local codes and regulations before determining
proper application and installation.
• Examine unit for shipping damage.
2 5
32
55mm
7 38
188mm
17
432mm
14 17
32
369mm
T68-WM
INLET 1/2"
COPPER TUBING
OUTLET 1/2"
COPPER TUBING
WIRING INPUT
18 3
16
462mm
3 21
32
93mm
14 14
362mm
T45-WM
CAT-09852-TUR
Figure 1
- T45/T68-WM-Top View
• Unit is designed to be mounted under or over sheetrock.
Install at least 6" - 8" above the floor for best performance.
Unit will fit between standard 16" studs on center.
• For unit dimensions on the T45/T68 refer to Figure 1, 3, 6
& 7. For T13 refer to Figure 2, 4, 8 & 9.
• Secure unit in proper position. Unit must be level to assure
proper drainage and operation.
Toester Wall-Mount Fan Coil
Installation Instructions
Model T45/68/13 All Sizes
