Turbolock YL-99, Руководство пользователя

Страница: 11 / 19

10
6.4 Entering Passage Mode
6.5 Exiting Passage Mode
Follow the steps below to exit passage mode.
1. Press any key to activate the lock.
2. After the beep stops and before the blue backlight goes off, press ‘*’ then ‘#’ in quick succession.
Once you hear two beeps passage mode is canceled.
Section 7. Resetting
If needed, all codes including the user and passage codes may be deleted. To reset the master code,
continue reading to the end of this section.
7.1 Soft Reset
To delete all user codes follow the instructions below:
1. Enter the master code and press the ‘#’ key.
2. Wait until the beeping sound stops and the blue backlight remains on.
3. Enter ‘00000’ and press the ‘*’ key. The lock will emit several beeps to confi rm all user codes have
been erased.
In this mode, any digit ‘0-9’ may be used to open the lock.
1. Enter the Passage Code then press ‘#’.
2. After the beep stops and before the blue backlight goes off, press ‘*’ then ‘#’ in quick succession.
The lock will emit several beeps to confirm Passage Mode is active.