Turbolock TL-400KBL, Руководство пользователя

Страница: 9 / 20

TurboLock TL-400KBL 9
Section 5
Using the TL-400KBL Bike Lock
Make sure the bike lock has been fully charged with the
power switch
in the ON position.
The TL-400KBL provides a variety of methods to unlock your bike, including one admin passcode
and one user passcode that can be shared to those you trust. Each time the lock disengages to
unlock the bike, the bike lock will beep and vibrate to indicate successful operation.
5 .1 Locking your Bike Lock
Step 1 . Press and hold the release button .
Step 2 . Inserting the chain plug into the lock hole, then release the button. The plug will click
into place.
Step 3 . Press the lock button ‘ ’.
You must press the lock button ‘ ’ before the keypad goes out; otherwise, the lock isn’t secured.
If the keypad turns off before you can complete all three steps, wake the keypad by pressing any
key. Then press the lock button ‘ ’.
Test whether the TL-400KB L has successfully locked by pressing the release button and
checking if the chain plug disengages and/or can be pulled out.
It’s best practice to use the
lock button ‘ ’ or unlock button ‘ ’ to wake up the keypad;
however, pressing any key once will wake up the keypad.